VT-CH-C014 - VVITAL Commercial Modern Dining Arm Chair
VVITAL VT-CH-C014 commercial modern dining arm chair with slim iron frame, E-coated rust protection, and a clean silhouette for indoor-outdoor spaces.
Specifications
- Dimension
- 57*61*81cm
- Seat Height
- 45cm
- Material
- Iron
- Color
- Powder Coated / E-coating
- Package Info
- 30pcs/stacking, 1200pcs/40'HQ
VVITAL Commercial Modern Dining Arm Chair
Model VT-CH-C014 — a slim iron dining arm chair with a restrained modern profile, made for spaces that sit between indoors and out.
Product Overview
The VT-CH-C014 is the design-led chair in the VVITAL iron range. Where the other models are shaped around a particular setting, this one is shaped around proportion. The frame is deliberately slim, the back sits at a shallow angle, and the armrests run in a single line from the rear upright to the front leg. The result is a chair that reads as modern without relying on ornament.
That restraint is useful in transitional spaces, the covered terraces, conservatories, glazed dining rooms, and hotel verandas where the boundary between indoor and outdoor seating is blurred. A chair built only for the garden can look out of place in those settings, and a fully upholstered indoor chair cannot tolerate the humidity. An iron frame with a clean silhouette and an E-coated finish sits comfortably in both.
The E-coating is what allows the design to be this slim. A thin frame has less metal to absorb moisture damage, so the primer layer inside the tubes and around the welds is doing more work than on a heavier chair. The powder coating on top gives the surface a consistent, matte appearance that pairs well with stone, timber, and glass.
Key Features
Slim, Continuous Frame Line
The rear upright, armrest, and front leg are formed as one visual line rather than three separate parts. This is what gives the chair its modern, uncluttered profile without adding decorative elements.
Designed for Transitional Spaces
Covered terraces, conservatories, and glass-walled dining rooms need furniture that belongs on both sides of the threshold. This chair is proportioned to look correct in an interior and to survive the humidity of a semi-outdoor room.
E-Coating on a Thin Frame
A slim iron frame has less mass to tolerate corrosion, so the E-coat primer is essential rather than optional. The electrophoretic layer reaches inside the narrow tubes and around each weld, sealing the metal before the powder coat is applied.
Matte Powder-Coated Finish
The outer coating has a low-sheen appearance that works better than gloss in design-led interiors. It resists fingerprints, reflects less light, and holds its color under UV exposure.
Comfortable Without Upholstery
The seat pan is shaped with a subtle curve, and the backrest angle is set for relaxed dining. The chair is comfortable for a full meal without a cushion, which keeps the silhouette clean.
Material Contrast That Works
The thin iron lines sit well against heavy timber tables, pale stone floors, and glass surfaces. The chair does not compete with the room, which is the point of a modern dining arm chair in a designed space.
Design and Construction
The frame is built from slim iron stock and fully welded at every junction. On a design-led chair, the weld quality matters more than usual because the joints are visible. Each one is dressed smooth before finishing, so the armrest flows into the front leg without a visible seam or fastener. There are no bolts, brackets, or plastic connectors interrupting the line.
Because the tube is narrow, the E-coating stage is critical. The electrophoretic primer is deposited inside the tube and around the weld beads, which are the areas most exposed to condensation in a conservatory or covered terrace. The powder coating is then applied as the visible layer and cured to a matte finish. The combination gives a thin frame the corrosion resistance it needs to be used in semi-outdoor rooms.
The seat pan is slightly dished and the backrest is set at a relaxed angle, so the chair supports a natural sitting position without the bulk of padding. Leg caps protect both the coating and interior floors. The chair ships fully assembled, which matters when a designer is specifying furniture for a completed room.
Where This Modern Arm Chair Works
Glass-Walled Dining Rooms and Conservatories
These rooms combine interior finishes with outdoor humidity. The slim iron frame looks correct beside a dining table indoors, while the E-coated finish handles the condensation that builds up on glazing.
Hotel Verandas and Covered Terraces
Hospitality spaces that open onto a terrace need furniture that looks considered from both sides. The modern profile suits the interior scheme, and the coated iron tolerates the damp air that drifts in from outside.
Design-Led Cafe and Restaurant Interiors
For venues with a strong visual identity, the chair needs to support the design rather than dominate it. The restrained frame works with timber, stone, concrete, and glass without competing for attention.
Residential Open-Plan Kitchens and Garden Rooms
Homeowners who want one chair to work at the kitchen table and on the adjacent patio will find the modern silhouette and weather-tolerant frame suited to both, without the visual shift that comes from mixing indoor and outdoor furniture.
