VT-CH-C012 - VVITAL Commercial Restaurant Outdoor Chair
VVITAL VT-CH-C012 commercial restaurant outdoor iron chair with E-coated rust protection and armless frame for fast cleaning, tight table nesting, and high-turnover service.
Specifications
- Dimension
- 57*61*81cm
- Seat Height
- 45cm
- Material
- Iron
- Color
- Powder Coated / E-coating
- Package Info
- 35pcs/stacking, 1470pcs/40'HQ
VVITAL Commercial Restaurant Outdoor Chair
Model VT-CH-C012 — a no-nonsense iron chair for restaurant patios and terraces, built around the realities of fast service and constant cleaning.
Product Overview
Restaurant patios are not gardens. A chair there is wiped down between covers, pushed in and out dozens of times a day, and occasionally dragged across paving by a server carrying three plates. The VT-CH-C012 is designed around that routine rather than around how it looks in a catalogue photograph.
It is an armless iron chair with a narrow footprint. Without armrests, it slides tight under the table, which lets a server clear a four-top without walking around the chairs and lets the floor plan breathe during a busy service. The open frame has no fabric panels, no timber slats, and no woven seat, so a spill is a one-cloth job rather than a drying-out problem.
The iron frame is E-coated before the powder coating goes on. That matters in commercial use because restaurant chairs are cleaned far more aggressively than home furniture. The primer layer is deposited into welds and tube ends where a spray coat cannot reach, so repeated washing and wet weather do not start rust at the joints within the first season.
Key Features
Narrow Armless Frame
Without arms, the chair tucks fully under the table. Servers can move between rows without turning sideways, and more covers fit into the same patio footprint.
Wipe-Clean in One Pass
The seat and back are smooth coated metal with no recesses or fabric covers. A single cloth pass removes sauce, oil, and drink spills during a quick table reset.
E-Coat Against Frequent Washing
Restaurant chairs are cleaned more often than domestic ones. The electrophoretic primer seals welded joints and tube interiors, so repeated wet wiping does not lead to rust bleed at the seams.
Manageable Weight for Staff
Heavy enough to stay put on the patio, light enough for one server to lift and reposition a row of chairs while setting up for the evening.
Powder Coating Over the Primer
The outer powder coat resists scuffing from shoes and chair-to-chair contact, and holds its color under strong sun across a full outdoor season.
Uniform Spec for Easy Replacement
One consistent model means damaged chairs can be swapped out without breaking the visual pattern of the patio, and stock is easier to manage across multiple sites.
Design and Construction
The frame is welded iron, with joints dressed smooth before finishing. In a restaurant chair, that smoothness is not just cosmetic: rough welds and open tube ends collect cleaning water and food debris, and they are usually the first place rust appears. The VT-CH-C012 closes those areas with an E-coat primer that reaches inside the tubes and around every weld, followed by a cured powder coat on the outside.
The seat pan is shaped to shed liquid rather than pool it. A spill runs off instead of sitting in a shallow tray, which reduces the amount of wiping needed between covers. The backrest is set at a comfortable dining angle without protruding beyond the rear legs, so chairs can sit close together along a wall or banquette without the backs clashing.
Leg caps protect both the coating and the patio surface. The chair arrives fully assembled, so a new batch can go straight onto the floor without a maintenance session with an allen key.
Where This Restaurant Chair Works
Sidewalk and Street-Facing Patios
Street seating gets dusty, rained on, and bumped by passers-by. The armless shape keeps the walkway clear, and the coated iron frame can be hosed down and wiped dry before the next service.
High-Turnover Terrace Dining
When a table needs to be reset in under two minutes, a chair with no fabric and no crevices is the practical choice. Staff can wipe the seat and back in one movement and move on to the next table.
Pubs and Beer Gardens
The weight of the iron frame keeps chairs from being knocked over on uneven ground, and the E-coated finish handles the damp, shaded conditions common in beer gardens.
Multi-Site Restaurant Groups
A single consistent chair spec simplifies purchasing across locations. Replacement units can be ordered in small batches and will match the existing furniture without a visual mismatch on the patio.
