VT-CH-C010 - VVITAL Commercial Gardan Outdoor Chair
VVITAL VT-CH-C010 commercial garden outdoor iron chair with E-coating rust protection, powder-coated steel frame, and slim armless design for patios and lawns.
Specifications
- Dimension
- 57*61*81cm
- Seat Height
- 45cm
- Material
- Iron
- Color
- Powder Coated / E-coating
- Package Info
- 35pcs/stacking, 1470pcs/40'HQ
VVITAL Commercial Gardan Outdoor Chair
Model VT-CH-C010 — a slim, armless iron chair with E-coating protection, built to sit in gardens, courtyards, and outdoor dining areas through every season.
Product Overview
The VT-CH-C010 is an armless iron chair made for the parts of a garden where furniture is left outside and forgotten about until the next meal. It has no timber to swell in the rain, no woven seat to sag after a wet winter, and no plastic components that go brittle under strong sun. The welded iron frame gives it a grounded, stable feel that lighter outdoor chairs often lack.
What makes an iron chair genuinely usable outdoors is the coating system, and this model relies on E-coating as its first line of defence. Electrophoretic coating drives the primer into every welded joint, tube interior, and tight corner where spray painting cannot reliably reach. A powder coating is then applied over the E-coat as the visible color layer. That combination is what stops an iron frame from rusting at the seams after a season of rain.
Because there are no armrests, the chair tucks neatly under a garden table when not in use. That keeps a small courtyard or balcony from feeling crowded and makes it easier to sweep or hose down the paving underneath. It is the sort of chair that works quietly in the background rather than competing with the planting around it.
Key Features
E-Coating Rust Barrier
An electrophoretic primer is deposited onto the iron frame before the color coat. Because the process is electrically driven, the E-coat reaches inside tubes and around weld beads where a spray gun cannot, sealing the metal against moisture at its most vulnerable points.
Powder Coating Over the E-Coat
The visible color layer is a cured powder coating applied over the E-coat. Together the two layers resist chipping, UV fading, and the surface oxidation that dulls untreated iron after a wet season.
Stable Welded Iron Frame
The solid iron construction gives this outdoor chair a low center of gravity. It stays planted on uneven paving and does not shift when someone leans back after a meal.
Armless Profile Saves Space
Without armrests, the chair slides fully under the table. This is useful in narrow gardens and balconies where every inch of walkway matters.
No Timber, No Webbing, No Sag
The seat is formed from the same metal frame rather than woven material or wooden slats, so there is nothing to rot, fray, or loosen after exposure to weather.
Straightforward to Clean
Garden dirt, bird droppings, and spilled drinks come off with a hose and a soft brush. The smooth E-coated and powder-coated surface has no crevices or fabric covers that trap damp and debris.
Design and Construction
An iron chair lives or dies by its coating, so the VT-CH-C010 is protected in two distinct stages. First, the cleaned and degreased frame is submerged in an electrophoretic bath, where an electric current deposits a uniform E-coat over the entire surface. This primer bonds chemically to the iron and flows into welded joints, tube ends, and the inside of the frame, which are the areas most likely to rust first. The E-coated frame is then cured before the powder coating is applied and baked as the outer color layer.
The joints are fully welded and dressed smooth, which removes the sharp edges and gaps where water would otherwise collect. The legs end in protective caps that lift the frame slightly off wet ground and keep the coating from being scraped away on rough paving or gravel.
The backrest is set at a gentle recline rather than a rigid vertical, which makes the chair comfortable for a normal garden meal without the need for a cushion. The seat pan is slightly dished toward the rear so the sitter does not slide forward on smooth metal. Every unit arrives assembled and ready to place around the table.
Where This Garden Chair Works
Family Gardens and Courtyards
This is a chair that can stay out on the lawn through spring and summer without being brought in every evening. The E-coat primer means sprinkler overspray and sudden showers are far less likely to start rust at the joints than on a basic painted iron frame.
Small Balconies and Terraces
The armless shape is the practical choice for compact outdoor spaces. Chairs can be pushed in tight against the wall or under a bistro table, leaving a clear path along the balcony railing.
Holiday Rentals and Guest Cottages
Owners cannot rely on guests to move furniture indoors before a storm. An E-coated iron chair is far more forgiving of being left out than timber or woven seating, and it needs no instruction to maintain.
Cafe Gardens and Beer Garden Seating
For venues with gravel or grass seating areas, the weight of the iron frame keeps chairs from sinking or toppling on uneven ground, and the armless design packs more covers around each table.
